Commercial Door Systems (CDS) is proud to have been manufacturing FRP doors for 25 years, and we owe our success to the support from people like you. All of us at CDS are looking forward to supplying you with many years of quality products.

Colors & Textures

F200 FRP Faced Door

Model F200 FRP flush doors are high quality low maintenance fiberglass faced doors with aluminum vision lites and edge trims. Sub-Interior Mainframes are constructed using narrow stile technology for a light weight, yet heavy duty door.


F300 FRP Faced Door

Model F300 FRP flush doors have the same qualities as our F200 door models with increased strengths of a wider and thicker internal aluminum mainframe. The sub-Interior mainframes are constructed using medium stile materials that have the ability to accept surface, mortised and concealed door hardware. The pocket of the stiles can accept most concealed vertical rod exit devices without the need for modifications as required on narrow stile doors.


F500 FRP Faced Door

Model F500 FRP doors have superior strength capabilities over the typical narrow and medium stile doors. These doors boast a wider and thicker internal aluminum mainframe. The FRP door has a full 1/8″ face wall thickness to the aluminum mainframe. These doors are designed to hold surface and mortised door hardware. The Sub-Interior mainframes are constructed using wide stile materials. A Heavy Duty door with the ability to accept and secure surface hardware, mortised hardware and concealed exit devices to the doors for a long lasting operational door.


F500HD FRP Faced Door

Model F500HD FRP flush door has the strengths and features of our original F500 doors. This model is Highly recommended for School Districts where a truly heavy duty entrance door is desirable. The wide stile rails and aluminum wall thicknesses built into this door make it one of the strongest doors available to you in an FRP faced door. The Sub-Interior mainframes are constructed using wide stile, heavy duty aluminum materials that have the ability to accept surface hardware, mortised hardware and concealed exit devices without the needs for thru bolted hardware applications.


F600RW FRP Faced Door

Model F600RW FRP doors have the thickest aluminum face wall available by CDS. The sub-Interior mainframe of this door is constructed using a heavy duty rugged face wall thickness of 3/16″. This door has been designed to stand up against abuse. The heavy walls firmly secure surface door mounted hardware such as exit devices and closers without the need of thru bolt mounting. Rugged wall design and heavy duty assembly make this door the choice to be used in any opening that maybe subject to abuse.


F200I FRP Faced Door

Foam Injected Stiles and Rails. Model F200-I is constructed the same as our F200 with narrow stile doors with integral edges. The internal stiles and rails are fully injected to fill hollow cavities of the door. Model F200-I FRP faced doors have the same construction features as the F200 with foam injected fully filled stiles and rails. Filling the stiles will help to eliminate all open areas that could permit bacteria or insects to accumulate. An excellent door model for interior and exterior applications. Maybe used in laboratory or CDC and NIH (germ free) building environments.


F500I FRP Faced Door

Foam Injected Stiles and Rails. Model F500-I is a wide stile version of our F200 and F200-I doors narrow stile doors with integral edges. The internal stiles and rails are fully injected to fill hollow cavities of the door.